Our virtually frameless roof pyramids are all bespoke made to a max external upstand of 2m x 2m.

Virtually frameless lantern in just 4 pieces of bonded glass. Fully thermally broken base frame. Maximum size 4 pieces - outside upstand of 3m x 1.5m. Fitting time just 10-15 minutes once lifted onto the roof.

Overhead view of our virtually frameless pyramid lantern. Maximum size 2m x 2m external upstand.

Internal view of our virtually frameless lantern. We can manufacture up to 3m x 1.5m external upstand size. In just 4 pieces of glass.

From the inside our virtually frameless pyramids are just glass with silicone joins. The thermally broken frame is hidden.

Our virtually frameless lanterns have an aluminium thermally broken frame at the base which can be plastered over. This leaves just 4 pieces of bonded glass on view. Making these very thin sight lines.

Our virtually frameless lanterns are all bespoke and can be installed in the most unusual areas. This one is fixed but we can also supply them with electric opening.

Our virtually frameless lantern can disappear in certain lights.

Our virtually frameless lanterns and pyramids are manufactured in our own UK Hampshire based factories.

Our virtually frameless pyramids are made to measure. Maximum external upstand size 1.7m x 1.7m. Allows so much light into all areas from the top of a house. All glass is specially stressed to allow bending under air pressure.

Our virtually frameless lanterns are all bespoke and come in different sizes. In just 4 pieces of bonded glass we can achieve external upload sizes of 3m x 1.5m. If the length is reduced to 2.5m we can go uo to 1.8m wide. Please check your sites before builders start.

We make various types of roofing systems and all can be mixed and matched. Flat roofs to allow uninterrupted views and lantern to reflect more light.

Our virtually frameless electric rooflights can be fitted in all types of homes and open to 45º.

We supply combination roofs, a mixture of flat fixed and electric opening roofs. The one shown here is 6m x 2m and the electric section is 2m x 2m.

Our combination of flat and electric roofs offers flexibility. Please note that our electric roofs are taller than our flat roofs. You can level them up by making the flat roof upstands taller.

Our electric roof lights are perfect for high exposed areas. They have a lip lowering the top and bottom joints. They have triple gaskets and are thermally broken to reduce heat loss.

Integrated fixed and opening lightwells. These are 6m x 2m with just 3 sections - 2 fixed and 1 electric opening. If buying all components, this roof would be delivered in kit form.

Bespoke opening and fixed roof lights. Our electronic openers can go up to 2m x 2m to allow plenty of air and light into the building. Frame only available in standard lengths in as little as 1 week. 2.8w x 1.3w.

Our virtually frameless electric lantern - max size 3m x 1.5m external upstand. There are no small openers or ugly motors on view. All you see are 4 pieces of bonded glass and all fixings and motors are hidden. They come fully bonded with all electrics, all you have to do is fix and connect 2 wires and plug in. Full video and manual are available.

Combination of electric and fixed lightwells allowing light and air into all rooms and sections.

All of our rooflights (flat or electric) have no visible joining screws.

Our electric lightwells are available in all sorts of bespoke sizes. This one has been fitted into a utility room.

Motors can be fitted on the short or long side. There will be restrictions on size if fitted on the short side. Please contact us before building.

Our electric rooflights can be manufactured 1m x 8m in one opening rooflight, with 3 pieces of glass. They work via a remote control or rocker switch via a press of a button. Supplied in kit form.

Our electric rooflights allow for lots of light and air into an area that would otherwise have been very dark.

Our electric rooflights can be fitted on all types of roofs. On tiled roofs they can open to 45º. This rooflight is supplied fully bonded.

Our electric rooflights are all bespoke and can be manufactured very long (easily achieve 7m long). At 1-3 projection. Here there are two pieces of glass bonded together and we can make up to 6m in one piece.

All our Juliette balconies sit totally inside the structure. Resulting in nice clean lines and no damage to the tiles. This also makes our balustrade very safe.

Our virtually frameless glass balustrades do not fix to the tiles so makes for a clearer finish and no damage.

Our virtually frameless glass balustrades allow for beautifully uninterrupted views.

Our balustrades are also a perfect fit for French doors. They can be made in one piece of glass to a maximum size of 2560mm.

Our virtually frameless glass balustrades are not fixed externally into brick work, allowing for a very clean and tidy finish.

Our balustrades allow uninterrupted clear views.

Our balustrades are suitable for all types of French doors, from very small to very large. Our maximum size is 2560mm in just one piece of glass.

Made using our special Sutera crystal clear glass. Allows for uninterrupted views, with no top or bottom rail!

Made with all types of sliding doors. These cannot be retro fitted.

These have been designed to be virtually invisible, with no marks on the glass - to take in the view and not be obstructed by the balustrade.

From the ground level our balustrades are very hard to see - The bi-folding doors look great open or closed.

Our balustrades can be fitted with all types of bifolding doors. One piece of glass up to max 2560 mm.

Our specially made Sutera glass is virtually undetectable due to the high spec of glass used.

We can also make external parameter balustrades with glass.

Believe it or not there is a balustrade here, made with our 100% crystal clear glass. Max width 2560mm / min 400mm aperture in one piece of glass.

Looks great in many different locations. Allowing full height, tilt turn for a full view.

A perfect combination of doors and windows working with our virtually frameless glass balustrades. Doors can be opened without concerns for safety.

Uninterrupted views with safety in mind. No top or bottom rails are required and made with crystal clear Sutera glass.

This loft bathroom was fitted with our virtually frameless glass balustrade, allowing light and air into the room.

Our virtually frameless glass balustrades are a perfect combination with full height, double tilt turn windows and doors. Allowing both ventilation and maintaining safety.

Our glass window seat / glass boxes are fitted with heat sealed glass on the outside to make the glass more flexible. Please check sizes with us before the aperture is built.

Glass window seats / glass boxes allow for clear views of the garden. All come as standard with solar reflection and are heat soaked.

We have been making glass window seats / glass boxes for over 14 years. Factory fully bonded and are easily fixed in a very short time frame. They can be installed in around 30 to 60 minutes.

Our factory bonded glass window seats / glass boxes come fully finished, including fixing tapes and can be fitted in around 30 to 60 minutes.

Glass window seat / glass box come with silicone bonded curves as standard. These windows allow for lots of natural light as well as a relaxing place to sit.

We are able to supply many different glass types for our window seats / glass boxes.

Available in all different styles. They are easily fitted as they are shipped with all fixing pieces already in place.

Glass window seat under construction in our factory. All sealing and glass polishing is carried out by hand.

Fixed corner window, silicon bonded glass to glass 90° corner. Comes factory finished.

Our very thin framed fixed window is ideal for frameless bonded corners. This installation has privacy glass on one side and clear on the other.

Our 36mm fixed window profile can be made into many shapes. It can take up to 48mm sealed units in just a 65mm wide frame, meaning you can achieve very low u-values.

Our virtually frameless fixed window with clear bonded corners and no silicone. If you require a price for this you must ask for clear unit not silicone bonded. We can accommodate up to a 48mm sealed unit.

We can manufacture a thin framed window, designed in house with a 38mm visible frame, capable of taking a 48mm sealed unit. Size shown 3.5m x 2.7m. This is capable of achieving some very low u-values and enhances noise reduction.

Our fixed window is perfect with outer frames and bonded glass. Achieving a 36mm sight line and can take up to 48mm sealed unit. This allows for thickened glass to be used whilst maintaining good thermal values.

Our fixed window, with its very thin frame, on all four sides, gives the impression it is frameless on the inside.

Here is an installation with walk on, anti slip, privacy glass.

Walk on rooflight with privacy glass.

Frameless flat - floating tiled floor allows the tiles to be finished level with our walk on glass. Fibre glass base makes it watertight.

Clear walk-on glass.

Underneath view of walk on glass, allowing light to flood through to the basement.

Internal walk on glass. This one is clear glass, but we can supply with a variety of different glass finishes.

This walk on glass has been supplied with a translucent Madras pixel finish. It provides an anti slip surface and a sample can be seen in our showroom.

A large lightwell with anti slip walk on glass. We can manufacture very long walk on glass so please contact us to check styles before building.

Long walk on glass lightwell with steel support under the joint. Made with translucent Madras pixel anti slip glass.

Glass window seat under construction in our factory. All sealing and glass polishing is carried out by hand.

Our flat rooflights awaiting transport from our factory.

Bonding the glass to our thermally broken aluminium frame.

All our products are made in our own UK based factory.

Various rooflights ready for polishing and packaging prior to leaving our factory.

All of our joints are factory bonded by hand to ensure a perfect seal.

In our factory we make all different shapes and sizes of roof units and make to customer requirements.

All of our roofs are hand assembled by fully trained staff.

In our factory we manufacture many different shapes. This one has 2 x 90 degree corners, but we can also make them with one or more. Please enquire before building.

All ?? clear glass for our virtual frameless glass balustrades await shipment.

Our up and over roofs are made in 2 fully bonded sections. Fixing and bonding one joint is all that is required on site The correct silicone is included in the delivery.

Our up and over roofs come in 2 sections. To ensure that joints are perfect, they are lined up in our factory before shipping.

To ensure all the joints are perfect in our up and over roofs, they are held in place by 2 robot lifters. This is the final check before wrapping and shipping.

All our rooflights are checked before leaving our factory.

All of our electric rooflights are tested before leaving our factory.

One of our units, where the roofs are made, on the Blacknest Estate.

Our virtually frameless lanterns are all factory bonded and finished, are easily installed and fully checked before delivery.

We supply frame only to the trade. In stock colours are usually available in a week. The frames seen here are awaiting transportation.

Dual colour electric rooflights, wrapped and ready to transport. We stock 2 different colour combinations in dual colours. Frame only delivery in 1 week. Bonded are 3 to 5 weeks.

Fixed flat rooflights await transport after checking and wrapping. Frame only are available from stock in many colours and delivery around 1 week.

To ensure a high level of quality, all of our products are examined in our factory before wrapping and transporting.

Glass window seats are moved around our factory by robots. They are all fully bonded by hand.

Glass window seat, bonded, checked, wrapped and awaiting transport. Factory finished and easy to fit. Available bespoke in a variety of colours.

Flat rooflights curing in the factory prior to final finishing, checking and wrapping.

Our bespoke virtually frameless lanterns are available in various sizes. Max size (just 4 pieces of bonded glass) 3m x 1.5m. Here the roofs are curing before final finishing and wrapping.

Our virtually frameless up and over rooflights. Each factory bonded section is masked before final sealing to ensure a clean, straight edge. All completed by hand.

Our frames are available in many different colours. The one shown here is brown. Please contact for a quote to produce in non stock colours.